Supercool

Once again, Summer is upon us. And what could be more satisfying on a hot Summer day than cold beer? I’ll tell you what: really cold beer.

In any good Spanish bar, they will serve you beer in a frozen glass, or copa fría. Here’s a pair of well-chilled beer tankards:

When you pour cold beer in copa fría, it will form ice crystals:

How much ice is formed, depends on temperature and beer strength. In general, the stronger the drink, the lower the freezing point.

On a number of occasions, I was chilling beer in the freezer. Then taking it out, opening the bottle and pouring it into the glass. There are four experimentally observed outcomes.

1. Beer is liquid both in a bottle and in a glass
2. Beer is liquid in a bottle but gets frozen as poured in a glass
3. Beer gets solid in a bottle so no way to pour it in a glass
4. Beer bottle explodes in the freezer

Scenario B is the most interesting one. (Scenario D is also interesting, but I won’t recommend it.) This is how the resulting beer slush looks like:

Now I saw a number of articles on the web where they explain this phenomenon with supercooling. I should say that I am not satisfied with this explanation. Why “supercooled” beer is not getting frozen in the bottle, even if I shake it, but forms slush once outside? When I put a bottle of (non-fizzy) rosé in a freezer, it either stays liquid (and remains liquid upon opening and pouring) or develops fine crystals of ice (which stay as they are upon opening both in a bottle and in a glass). On one occasion, a forgotten in a freezer bottle of rosé got frozen solid. (According to The Academic Wino, “the freezing point of table wine is –5 °C”, and my freezer goes down to –18 °C.)

To explain what happens, we don’t need to bring supercooling in. We just have to keep in mind that our drink is an aqueous solution. And that alcohol is only one of many solutes there. Of them, the most important are sugars and carbon monoxide. (Some beers, such as Guinness, contain dissolved dinitrogen as well as CO₂.)

For dissolution to take place, the overall change of free energy should be negative, but the heat may be either absorbed or released. The dissolving of sugar in water is an endothermic process. The increase in temperature results in an increase in solubility. The reverse process, precipitation (often in form of crystallisation), is exothermic.

On the contrary, the dissolving of gases in water is exothermic. The increase in temperature results in an decrease in gas solubility. The reverse process, gas evolution, is endothermic. So as soon as the bottle is opened, the gas starts to escape and the temperature drops — in our example, below the freezing temperature. Sometimes, it drops so rapidly that beer freezes in the bottleneck. And while I am on it: as this video shows, dissolving of alcohol in water is also exothermic. Not that it changes much in our beer glass experiments.

¡Salud!

More photos of beer @ Shutterstock.

You’re in CD spectroscopy

One day, idly browsing the web (as usual), I came across this:

I disagree with an unknown (to me) co-author of Antoine de Saint-Exupéry. For one thing, you don’t have to be “in organic chemistry” to recognise a reaction coordinate diagram. For another, 25 or so years ago my first reaction (that is, if I never read Le Petit Prince) would be: “Hey dude, your CD spectrum is upside down”. The fact is, I am still alive, so my life then was far from being over.

Isn’t the Web great? Nowadays I don’t have to venture to the library and sift through the J. Biol. Chem.’s and J. Mol. Biol.’s. (Even if I wanted, there is no library like that in Fuerteventura.) I can get the CD spectra online and for free in the Protein Circular Dichroism Data Bank [1]. Better still, using DichroMatch I can find spectra that are similar to my query [2]. (I just checked: it works!) Here’s how the CD spectrum of a typical α-helical protein (such as haemoglobin) looks like (a):

(a)

So... where’s a hat? Back in 1990s, our lab had a decommissioned Jobin Yvon Mark IV dichrograph, which, as I understand now, was an excellent machine. The haemoglobin spectrum would look more or less like this (b):

(b)

Neither equipment nor our samples allowed us to collect spectra below 200 nm, therefore most of the spectrum was in the negative ellipticity region. We did not really need to go below 200 nm: we were mostly monitoring ellipticity at 222 nm as a function of temperature or concentration of guanidinium chloride or other denaturing agents.

Mind you, not all proteins have this inverted hat region in their CD spectra. For example, ferredoxin (c), rubredoxin (d) or immunoglobulin G (e):

(c)

(d)

(e)

In the 21^st century, protein X-ray crystallography became very much a routine technique. Once you solve the structure, there’s no mystery left. On the contrary, the CD spectra are as beautiful and enigmatic as star spectra. They still need an intelligent interpreter. They tell the story and in the same time keep the secret. I think the little prince would appreciate them.

1. Whitmore, L., Woollett, B., Miles, A.J., Klose, D.P., Janes, R.W. and Wallace, B.A. (2011) PCDDB: the protein circular dichroism data bank, a repository for circular dichroism spectral and metadata. Nucleic Acids Research 39, D480—D486.
2. Klose, D.P., Wallace, B.A. and Janes, R.W. (2012) DichroMatch: a website for similarity searching of circular dichroism spectra. Nucleic Acids Research 40, W547—W552.

The first CYP1A1 structure

CYP1A1 was one of the first P450 enzymes to be characterised and, as its name indicates, holds the first place in the systematic nomenclature of P450s [1]. However, it was not until last year that the first crystal structure of human CYP1A1 in complex with α-naphthoflavone has been determined at 2.6 Å resolution [2]. The structure [3] is released this week.

1. Nebert, D.W., Nelson, D.R., Coon, M.J., Estabrook, R.W., Feyereisen, R., Fujii-Kuriyama, Y., Gonzalez, F.J., Guengerich, F.P., Gunsalus, I.C., Johnson, E.F., Loper, J.C., Sato, R., Waterman, M.R. and Waxman, D.J. (1991) The P450 superfamily: update on new sequences, gene mapping, and recommended nomenclature. DNA Cell Biol. 10, 1—14.
2. Walsh, A.A., Szklarz, G.D. and Scott, E.E. (2012) Cytochrome P450 1A1 structure and utility in predicting drug and xenobiotic metabolism. Proceedings of the 19th International Symposium on Microsomes and Drug Oxidations and 12th European ISSX Meeting, Noordwijk, The Netherlands, 17—21 June 2012.
3. PDB:4I8V

Binary pnictogen halides

Here’s a tricky (trick?) question from the final exam of MITx course Introduction to Solid State Chemistry:

Which compound has the higher boiling point, phosphorus trifluoride (PF₃) or phosphorus pentafluoride (PF₅)?

Naturally, you are supposed to figure this out from the first principles, or rather, from some principles taught in this course, not from Wikipedia (or “by googling”, as some put it).

(a)	(b)

The problem is, the “right” answer, PF₃, is actually, factually wrong. Even though this question cost only two points (of 150), a rather animated debate followed the exam.

Those who defended the “right” but factually wrong answer (a) were proposing that what the problem was testing our thinking rather than actual knowledge, and our thinking should have been along the lines of VSEPR model. VSEPR rules correctly predict PF₃ to be trigonal pyramidal and PF₅ to be trigonal bipyramidal. The dipole moment of a polar molecule PF₃ should make it less volatile than apolar PF₅. Those who chose the “wrong” but factually correct answer (b) were arguing that polarisability of larger PF₅ is higher than that of PF₃ and therefore the London dispersion forces in PF₅ would beat dipole-dipole interactions in PF₃. The (a) party were saying that making the answer you’d get by applying principles different to the one you’d get by “googling” is a good protection against cheating. The (b) party were retorting that this is a silly way of protection, that the question asked was what has the higher boiling point, not what could be expected to have the higher boiling point, and that expecting students to come up with the factually wrong answer is not exactly pedagogical.

Truth to be told, the methods of estimating boiling or melting points of materials were simply not a part of this course. The only thing one could do was to determine whether the molecule has a non-zero dipole moment. But there is no way to figure out which effect will be stronger, the increase in dispersion forces or dipole-dipole interactions.

One would think that the physical properties of such simple compounds as binary halides of Group 15 elements (pnictogens) are studied well and long ago. Not really. I tried to compile a table of dipole moments and melting/boiling points for pnictogen tri- and pentahalides, MX₃ and MX₅, using various resources [1—5]. As you can see, there are still many gaps.

Trihalide	μ (D)	mp (°C)	bp (°C)	Pentahalide	mp (°C)	bp (°C)
NF3	0.234	–207	–129	—
PF3	1.03	–151.5	–101.8	PF5	–93.7	–84.5
AsF3	2.59	–6.0	62.8	AsF5	–79.8	–52.8
SbF3	?	290	345	SbF5	8.3	141
BiF3	?	649	900	BiF5	154.4	230
NCl3	0.6	–40	71	—
PCl3	0.97	–93.6	76.1	PCl5	167	160s
AsCl3	2.15	–16.0	130.8	AsCl5	–50	?
SbCl3	2.75	73.4	223	SbCl5	4	140
BiCl3	4.6	233.5	441	BiCl5	?	?
NBr3	?	?	?	—
PBr3	?	–41.5	173.2	PBr5	<100d	106d
AsBr3	1.66	31	221	AsBr5	?	?
SbBr3	2.47	96	288	SbBr5	?	?
BiBr3	3.6	219	462	BiBr5	?	?
NI3	?	–20s	?	—
PI3	~0	61.1	227	PI5	41	?
AsI3	?	141	400	AsI5	?	?
SbI3	1.58	170.5	401	SbI5	79	401
BiI3	?	408.6	~542	BiI5	?	?

d, decomposition
s, sublimation

What, if any, trends can we see?

• The dipole moment of MX₃ grows larger down the group of the central atom M, e.g. μ(NF₃) < μ(PF₃) < μ(AsF₃), and grows smaller down the group of ligand atom X, e.g. μ(SbCl₃) > μ(SbBr₃) > μ(SbI₃).
• As the sizes of both central atom and ligands go up, so do the melting and boiling points.
• As dipole moments go up, so do the melting and boiling points.

Something curious happens, though, when one crosses the phosphorus—arsenic borderline. AsF₃ has a dipole moment of 2.59 debye. As expected, both mp and bp of AsF₃ are, respectively, higher than those of AsF₅. PF₃, however, has much lower moment of 1.03 D. Both mp and bp of PF₃ are, respectively, lower than those of PF₅. Similarly, mp of AsCl₃ is higher than mp of AsCl₅, whereas mp of PCl₃ is lower than mp of PCl₅. Similarly... but no, there are too many gaps in the table “down there”.

Which shows, by the way, that “googling” does not help if the data is not available. For the future, the course authors may consider asking a very similar question about a pair of compounds from “down there”. Thus the whole conflict between the (as yet unknown) “truth” and “expected answer” could be easily avoided.

Since the electronegativities decrease down the group for both M and L, the most polar M—L bond must be Bi—F bond and BiF₃ should have the largest dipole moment. Well I couldn’t find its value. But it is known that bismuth trifluoride has ionic structure, and has the highest melting (649 °C) and boiling (900 °C) points of all binary pnictogen halides. On the other side of the spectrum, we have extremely sensitive nitrogen triiodide. A feather tickle, a loud noise and, I suppose, any attempt to measure its dipole moment will set off an explosive decomposition (see the video below):

2 NI₃ → N₂ + 3 I₂

References

1. Earnshaw, A. and Greenwood, N. (1997) Chemistry of the Elements, 2^nd Edition. Butterworth-Heinemann, Oxford.
2. Nelson, R.D., Jr., Lide, D.R., Jr. and Maryott, A.A. (1967) Selected values of electric dipole moments for molecules in the gas phase. National Standard Reference Data Series — National Bureau of Standards 10, Washington, DC.
3. Cotton, S. (2001) Nitrogen triiodide. Molecule of the Month collection, University of Bristol.
4. WebElements
5. atomistry.com

Macromolecular Xmas decorations

This year I don’t have a Christmas tree. (There aren’t many in Fuerteventura.) But I’ve got some models from this week’s new PDB structures [1—5] which look Christmassy enough to decorate my blog. Merry Christmas and a happy New Year everybody!

1. Hui, F., Scheib, U., Hu, Y., Sommer, R.J., Aroian, R.V. and Ghosh, P. (2012) Structure and glycolipid binding properties of the nematicidal protein Cry5B. Biochemistry 51, 9911—9921.
2. Lence, E., Tizón, L., Otero, J.M., Peón, A., Prazeres, V.F.V., Llamas-Saiz, A.L., Fox, G.C., van Raaij, M.J., Lamb, H., Hawkins, A.R. and González-Bello, C. (2013) Mechanistic basis of the inhibition of type II dehydroquinase by (2S)- and (2R)-2-benzyl-3-dehydroquinic acids. ACS Chem. Biol. 8, 568—577.
3. Strugatsky, D., McNulty, R., Munson, K., Chen, C.-K., Soltis, S.M., Sachs, G. and Luecke, H. (2013) Structure of the proton-gated urea channel from the gastric pathogen Helicobacter pylori. Nature 493, 255—258.
4. Tang, Q., Gao, P., Liu, Y.-P., Gao, A., An, X.-M., Liu, S., Yan, X.-X. and Liang, D.-C. (2012) RecOR complex including RecR N-N dimer and RecO monomer displays a high affinity for ssDNA. Nucleic Acids Res. 40, 11115—11125.
5. Ziervogel, B.K. and Roux, B. (2013) The binding of antibiotics in OmpF porin. Structure 21, 76—87.

The discovery of the quantum dot

Louis Brus talks about his discovery of colloidal quantum dots in 1980s.

One of the truisms of science is that the basic research scientists who invent something are not the best judges of where it’s useful.

Undecahaem cytochrome from Shewanella

The first crystal structures of the 11-haem cytochrome from Shewanella sp. strain HRCR-6 have been solved [1], both ligand-free [2] and in complex with iron chelates Fe(III)-citrate [3] and Fe(III)-nitrilotriacetate [4]. The authors propose that

the region around heme 7 could be a rudimentary active site for association of soluble organic redox partners, which would be consistent with the UndA functioning as an enzyme with broad, but differential, specificity to a variety of substrates, in contrast to a nonspecific cathode on the cell surface <such as decaheme cytochrome MtrF>.

1. Edwards, M.J., Hall, A., Shi, L., Fredrickson, J.K., Zachara, J.M., Butt, J.N., Richardson, D.J. and Clarke, T.A. (2012) The crystal structure of the extracellular 11-heme cytochrome UndA reveals a conserved 10-heme motif and defined binding site for soluble iron chelates. Structure 20, 1275—1284.
2. PDB:3UCP
3. PDB:3UFH
4. PDB:3UFK

Visualising hexabenzocoronene

A few years ago, I wrote that we do not know how to draw ferrocene or a nitro group. (Still true.) Is the situation with polycyclic aromatic hydrocarbons any better?

Take hexabenzo[bc,ef,hi,kl,no,qr]coronene, one of the subjects of the single-molecule visualisation study published last week in Science [1]. One way to draw it shown in diagram (a):

(a)

I chose this one (out of many other possible Kekulé representations) because I can reproduce it on a paper napkin (beermat, Post-it note, you name it). If you look carefully, you will notice that the central ring and the six outermost rings are connected with single bonds.

(b)

Continuing the paper-napkin-doodle argument, it is even easier to draw a circle inside of each ring as in all-delocalised representation (b). However, that would not be a preferred diagram from IUPAC point of view [2, GR-6.5]: for example, benzene ⏣ is acceptable but ⌬ is preferred. Moreover, “it is generally not acceptable to use curves in two adjacent fused rings”. Still, I’d stick with circles.

The question is, do I have to draw a circle within each ring? Of course not. If I draw seven aromatic rings and connect the with single bonds as shown in (c), the resulting structure will be the same. In this way, I can even save some ink (graphite, chalk, etc.)

(c)

Without the circles, the six rings that surround the central ring in (c) start to look, well, more empty. Using the noncontact atomic force microscopy (NC-AFM), the team behind the study [1] were able to show (and in this case “to show” really means “to show”), that those rings are indeed slightly larger. The C—C bonds in the central ring (i-bonds, 1.417 Å) are 0.03 Å shorter than the bonds connecting that ring with the six outermost rings (j-bonds, 1.447 Å).

1. Gross, L., Mohn, F., Moll, N., Schuler, B., Criado, A., Guitián, E., Peña, D., Gourdon, A. and Meyer, G. (2012) Bond-order discrimination by atomic force microscopy. Science 337, 1326—1329.
2. Brecher, J. (2008) Graphical representation standards for chemical structure diagrams (IUPAC Recommendations 2008). Pure Appl. Chem. 80, 277—410.

IUPAC periodic table?

The cover of the latest issue of Chemistry International features a fragment of Homenatge als elements (Hommage to the Elements) by the Catalan artist Eugènia Balcells. The display in the atrium of the Physics and Chemistry Library at the University of Barcelona takes the shape of the periodic table where each chemical element is represented by its emission spectrum [1]. According to the artist’s website, it “was born as a counterpoint” to the video installation Freqüències (Frequencies).

The Periodic Table Project at the University of Waterloo, Canada is another work of art,

designed by chemistry students from all Canadian provinces and territories, 20 U.S. states, and 14 countries. It can be viewed online and is available as a printed poster.

Also, as a free app for Apple or Android.

Both the Periodic Table Project and Hommage to the Elements use the medium-long form periodic table. The “IUPAC Periodic Table of the Elements” as published at the back of Chemistry International (in this issue, for the first time it includes flerovium and livermorium) has the same shape. Why the quotes? Because, as a matter of fact, there is no such thing as IUPAC-approved periodic table. Jeffery Leigh wrote three years ago that “there is unlikely to be a definitive IUPAC-recommended form of the periodic table” [2]. In my humble opinion, this is unfortunate that IUPAC refuses to take a position on this matter. Eric Scerri takes a view that “IUPAC should in fact take a stance on the membership of particular groups even if this has not been the practice up to this point” [3]. To illustrate this point, he goes to address the Group 3 question. He argues that the most logical composition of this group is Sc, Y, Lu and Lr (rather than Sc, Y, La and Ac), as shown below.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

H

He

Li

Be

B

C

N

O

F

Ne

Na

Mg

Al

Si

P

S

Cl

Ar

K

Ca

Sc

Ti

V

Cr

Mn

Fe

Co

Ni

Cu

Zn

Ga

Ge

As

Se

Br

Kr

Rb

Sr

Y

Zr

Nb

Mo

Tc

Ru

Rh

Pd

Ag

Cd

In

Sn

Sb

Te

I

Xe

Cs

Ba

La

Ce

Pr

Nd

Pm

Sm

Eu

Gd

Tb

Dy

Ho

Er

Tm

Yb

Lu

Hf

Ta

W

Re

Os

Ir

Pt

Au

Hg

Tl

Pb

Bi

Po

At

Rn

Fr

Ra

Ac

Th

Pa

U

Np

Pu

Am

Cm

Bk

Cf

Es

Fm

Md

No

Lr

Rf

Db

Sg

Bh

Hs

Mt

Ds

Rg

Cn

Nh

Fl

Mc

Lv

Ts

Og

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

In addition to arranging all the elements in a more correct sequence of increasing atomic numbers, the decision to move to a long-form or 32-column table forces the periodic table designer towards just one possible option regarding the question of which elements to place in group 3.

I entirely agree with that. And yet Scerri stops short of proposing that IUPAC should support the 32-column (or “long, long form”, as Leigh put it) periodic table; in fact he explicitly states that he is not suggesting a change of IUPAC policy, viz. that of doing nothing about it. Why? That would be one of the most important and immediately noticeable changes sponsored by IUPAC in decades.

The problem is, sorting out the Group 3 does not resolve the problem how to number the f-block columns. If we stick with 18 groups (blue numbering on the top of the table), that would be really unfair towards the lanthanoids and actinoids. Why don’t we simply number groups from 1 to 32 (red numbers on the bottom of the table)? Sc, Y, Lu and Lr will find themselves in Group 17. So what? It’s not that many people will miss the current Group 17 — nobody really calls these elements anything but “halogens”. And 32 is even more convenient number than 18. I think it’s about time IUPAC took the lead and said how exactly the periodic table should look like.

1. Alvarez, S. (2012) An artist’s hommage to the elements. Chemistry International 34, 5.
2. Leigh, J. (2009) Periodic tables and IUPAC. Chemistry International 31, 4—6.
3. Scerri, E. (2012) Mendeleev’s periodic table is finally completed and what to do about group 3? Chemistry International 34, 28—31.

P. aeruginosa bacterioferritin—ferredoxin complex

The X-ray crystal structure of Pseudomonas aeruginosa bacterioferritin (Pa-BfrB) in complex with bacterioferritin-associated ferredoxin (Pa-Bfd) has been solved at 2.0 Å resolution [1, 2].

As the first example of a ferritin-like molecule in complex with a cognate partner, the structure provides unprecedented insight into the complementary interface that enables the [2Fe-2S] cluster of Pa-Bfd to promote heme-mediated electron transfer through the BfrB protein dielectric (~18 Å), a process that is necessary to reduce the core ferric mineral and facilitate mobilization of Fe²⁺. The Pa-BfrB—Bfd complex also revealed the first structure of a Bfd, thus providing a first view to what appears to be a versatile metal binding domain ubiquitous to the large Fer2_BFD family of proteins and enzymes with diverse functions.

1. Yao, H., Wang, Y., Lovell, S., Kumar, R., Ruvinsky, A.M., Battaile, K.P., Vakser, I.A. and Rivera, M. (2012) The structure of the BfrB—Bfd complex reveals protein—protein interactions enabling iron release from bacterioferritin. J. Am. Chem. Soc. 134, 13470—13481.
2. PDB:4E6K

Crystal structure of HGbI

Hell’s Gate globin I from an obligate methanotroph Methylacidiphilum infernorum. Poetry.

1. Teh, A.-H., Saito, J.A., Baharuddin, A., Tuckerman, J.R., Newhouse, J.S., Kanbe, M., Newhouse, E.I., Rahim, R.A., Favier, F., Didierjean, C., Sousa, E.H.S., Stott, M.B., Dunfield, P.F., Gonzalez, G., Gilles-Gonzalez, M.A., Najimudin, N. and Alam, M. (2011) Hell’s Gate globin I: An acid and thermostable bacterial hemoglobin resembling mammalian neuroglobin. FEBS Lett. 585, 3250—3258.
2. Pechkova, E., Scudieri, D., Belmonte, L. and Nicolini, C. (2012) Oxygen-bound Hell’s gate globin I by classical versus LB nanotemplate method. J. Cell Biochem. 113, 2543—2548.
3. PDB:3S1I
4. PDB:3S1J
5. PDB:3UBC
6. PDB:3UBV

Polyoxomolybdate clusters of Mo/W-storage protein

Five years ago, Schemberg et al. reported the crystal structure of molybdenum/tungsten storage protein from Azotobacter vinelandii complexed with polyoxotungstates [1, 2].

Now Kowalewski et al. report the 1.6 Å X-ray structure of the same protein containing a variety of polyoxomolybdate clusters, from Mo₃ to Mo₈ [3].

Some N₂-fixing bacteria prolong the functionality of nitrogenase in molybdenum starvation by a special Mo storage protein (MoSto) that can store more than 100 Mo atoms. The presented 1.6 Å X-ray structure of MoSto from Azotobacter vinelandii reveals various discrete polyoxomolybdate clusters, three covalently and three noncovalently bound Mo₈, three Mo_5–7, and one Mo₃ clusters, and several low occupied, so far undefinable clusters, which are embedded in specific pockets inside a locked cage-shaped (αβ)₃ protein complex. <...> The formed polyoxomolybdate clusters of MoSto, not detectable in bulk solvent, are the result of an interplay between self- and protein-driven assembly processes that unite inorganic supramolecular and protein chemistry in a host–guest system.

1. Schemberg, J., Schneider, K., Demmer, U., Warkentin, E., Müller, A. and Ermler, U. (2007) Towards biological supramolecular chemistry: a variety of pocket-templated, individual metal oxide cluster nucleations in the cavity of a Mo/W-storage protein. Angewandte Chemie International Edition 46, 2408—2413.
2. PDB:2OGX
3. Kowalewski, B., Poppe, J., Demmer, U., Warkentin, E., Dierks, T., Ermler, U. and Schneider, K. (2012) Nature’s polyoxometalate chemistry: X-ray structure of the Mo storage protein loaded with discrete polynuclear Mo–O clusters. J. Am. Chem. Soc. 134, 9768—9774.

P450-flavodoxin fusion enzyme XplA

XplA is a P450-flavodoxin fusion enzyme that mediates the metabolism of the military explosive RDX (1,3,5-trinitro-1,3,5-triazinane) in Rhodococcus rhodochrous 11Y [1]. Bui et al. have conducted a detailed spectroscopic and crystallographic study of this unusual hemoflavoprotein [2, 3].

The XplA P450 has evolved as a reductase (rather than oxidase) of RDX and structural alterations to its heme- and FMN-binding domains have led to reduction potentials for low-spin heme iron Fe³⁺/Fe²⁺ and FMN_SQ/HQ couples being much more positive than those seen in typical P450s and flavodoxins, but consistent with non-oxidative P450 catalysis. These evolutionary steps have also led to a constricted P450 active site with high affinity for RDX (but also for the small heterocyclic inhibitor imidazole), and also to substantially diminished affinity for FMN in the flavodoxin domain.

1. Rylott, E.L., Jackson, R.G., Sabbadin, F., Seth-Smith, H.M.B., Edwards, J., Chong, C.S., Strand, S.E., Grogan, G. and Bruce, N.C. (2011) The explosive-degrading cytochrome P450 XplA: biochemistry, structural features and prospects for bioremediation. Biochim. Biophys. Acta 1814, 230—236.
2. Bui, S.H., McLean, K.J., Cheesman, M.R., Bradley, J.M., Rigby, S.E.J., Levy, C.W., Leys, D. and Munro, A.W. (2012) Unusual spectroscopic and ligand binding properties of the cytochrome P450-flavodoxin fusion enzyme XplA. J. Biol. Chem. 287, 19699—19714.
3. PDB:4EP6

Stachydrine demethylase

Crystal structures were determined for the Rieske-type monooxygenase, stachydrine demethylase, in the unliganded state (at 1.6 Å) and in the product complex (at 2.2 Å) [1—3].

1. Daughtry, K.D., Xiao, Y., Stoner-Ma, D., Cho, E., Orville, A.M., Liu, P. and Allen, K.N. (2012) Quaternary ammonium oxidative demethylation: X-ray crystallographic, resonance Raman, and UV-visible spectroscopic analysis of a Rieske-type demethylase. J. Am. Chem. Soc. 134, 2823—2834.
2. PDB:3VCA
3. PDB:3VCP

FAD/NADPH-domain of flavocytochrome P450 BM3

The crystal structure of the FAD/NADPH-binding domain of the Bacillus megaterium flavocytochrome P450 BM3 has been solved in both the absence and presence of the ligand NADP⁺ [1—3].

1. Joyce, M.G., Ekanem, I.S., Roitel, O., Dunford, A.J., Neeli, R., Girvan, H.M., Baker, G.J., Curtis, R.A., Munro, A.W. and Leys, D. (2012) The crystal structure of the FAD/NADPH-binding domain of flavocytochrome P450 BM3. FEBS J. 279, 1694—1706.
2. PDB:4DQK
3. PDB:4DQL

Carbon—carbon quadruple bond

Quadruple and higher order metal—metal bonds are known for transition metals, lanthanoids and actinoids. But for main group elements? Using four different computational methods, Shaik et al. [1] show that

C₂ and its isoelectronic molecules CN⁺, BN and CB⁻ (each having eight valence electrons) are bound by a quadruple bond. The bonding comprises not only one σ- and two π-bonds, but also one weak ‘inverted’ bond, which can be characterized by the interaction of electrons in two outwardly pointing sp hybrid orbitals.

According to Shaik, the existence of the fourth bond in C₂ suggests that it is not really diradical C₂^2• [2]:

If C₂ were a diradical it would immediately form higher clusters. I think the fact that you can isolate C₂ tells you it has a barrier, small as it may be, to prevent that.

1. Shaik, S., Danovich, D., Wu, W., Su, P., Rzepa, H.S. and Hiberty, P.C. Quadruple bonding in C₂ and analogous eight-valence electron species. Nature Chemistry 4, 195—200.
2. Extance, A. Calculations reveal carbon-carbon quadruple bond. Chemistry World, 29 January 2012.

Collaborative Computational Technologies for Biomedical Research

It’s been a while since I read a science/technology book from back to back. And was it worth it? Definitely.

The book is about collaboration and is a collaboration. Ironically, the best-written chapters almost invariably are those by single authors. Which confirms my own theory that writing (including scientific writing) is not exactly collaborative activity. The contributions by Robert Porter Lynch [1], Robin W. Spencer [2], Victor J. Hruby [3], Edward D. Zanders [4], Brian Pratt [5] and Keith T. Taylor [6] are especially worth noting — I wish the whole book was written at the level of these chapters. Then again, collaboration is always a compromise. The material presented here is diverse and heterogeneous — what did you expect?

I am sure there are people who do all sorts of stuff using their smartphones, including scientific database browsing and chemical structure drawing [7]. This latter activity does not strike me as especially productive or convenient. (Also, makes me glad that the use of mobile phones while driving is outlawed in most of Europe.) In my view, for the purposes of computer graphics bigger is better: if I had a choice, I’d go for HIPerWall (25,600 × 8000 pixels) or, better still, HIPerSpace (35,840 × 8000 pixels) display walls [8]. Then I could draw some really large (in many senses) molecules.

As much as I enjoy reading the real (hardcopy) book, it could be nice to see it online, preferably in open access. For instance, Chapter 25 [9] has 196 references, all of them are URLs, and some of them are rather long ones. I’d love to be able to click on them rather than type!

Will the wikis, virtual communities and cloud computing replace the behemoth pharma companies and NCBI? A man can dream. Ekins et al. write [10]:

As a result of the recent recession there is a lot of drug discovery and development talent available now due to company lay-offs. If the software or other tools to enable this workforce to be productive and collaborate were available and they participated in the existing scientific collaboration networks, then there may be potential for enormous breakthroughs.

I wish I could share the authors’ optimism. Yes there is potential, but it is highly unlikely that unemployed researchers are in the mood to collaborate. In case you wonder why: being unemployed is a full-time occupation, which leaves preciously little spare time. I rather inclined to agree with Robin W. Spencer [2]:

Especially for cutting-edge scientific challenges, the participants you need are probably well paid and not particularly enthused by another tee shirt, coffee cup, or $100 voucher.

More quotes from this book can be found here.

I use this opportunity to lament the decline of old-fashioned copy editing [11]. I get used to the lack of any such luxury in open access publications: if the paper is accepted, the publisher tends to keep all your typos intact. But when you buy a book from John Wiley & Sons for a hundred something bucks, you’d expect some editorial intervention. (To be honest, I did not buy it. I can’t afford buying books at such prices anyway.) The major and minor irritations include:

• Typos: “chpater” instead of “chapter” (p. 281) — I thought by now the text editing software should take care of these.
• Tautologies: ‘The institutes of the national Institutes of Health’ (p. 496); ‘... we need to consider standards specifically for chemistry and biology. In chemistry specifically...’ (p. 202).
• Impenetrable sentences, e.g. ‘Many aspects should be considered, such as a regulatory path for filing, potential market size, differentiability of the therapeutic and experience with and difficulty to carry out clinical trials in the disease of interest’ (p. 252) or ‘This will only be done by drawing from the mental resources of an extended scientific community in an innovative and complex, yet “daily practice”, manner that promises a profound impact on our ability to use existing data to generate new knowledge with the maximum conceivable serendipity’ (p. 454). You what?
• Overabundance of acronyms (have a look at p. 497 and you’ll see what I mean).
• Overabundance of buzz-words of yesteryear: crowdsourcing (see below), integration, leveraging, paradigm, stakeholder and so on. The worst offenders, however, are clear and clearly. Clearly, when these words is used too often, it is clear that something is not quite clear.

Now for “crowdsourcing”: I find the term not only ugly but offensive. As a scientist (once a scientist, always a scientist), I am open to collaboration. Also, as a scientist, I detest being part of a crowd. Period.

Don’t get me wrong: it is a good book. I wouldn’t hesitate to recommend it to any decent scientific library. But it could have been a great book.

1. Lynch, R.P. Collaborative innovation: essential foundation of scientific discovery. In: Ekins, S., Hupcey, M.A.Z. and Williams, A.J. (eds.) Collaborative Computational Technologies for Biomedical Research. John Wiley & Sons, Hoboken, 2011, pp. 19—37.
2. Spencer, R.W. Consistent patterns in large-scale collaboration. Ibid., pp. 99—111.
3. Hruby, V.J. Collaborations between chemists and biologists. Ibid., pp. 113—120.
4. Zanders, E.D. Scientific networking and collaborations. Ibid., pp. 149—160.
5. Pratt, B. Collaborative systems biology: open source, open data, and cloud computing. Ibid., pp. 209—220.
6. Taylor, K.T. Evolution of electronic laboratory notebooks. Ibid., pp. 303—320.
7. Williams, A.J., Arnold, R.J.G., Neylon, C., Spencer, R.W., Schürer, S. and Ekins, S. Current and future challenges for collaborative computational technologies for the life sciences. Ibid., pp. 491—517.
8. He, Z., Ponto, K. and Kuester, F. Collaborative visual analytics environment for imaging genetics. Ibid., pp. 467—490.
9. Bradley, J.-C., Lang, A.S.I.D., Koch, S. and Neylon, C. Collaboration using open notebook science in academia. Ibid., pp. 425—452.
10. Ekins, S., Williams, A.J. and Hupcey, M.A.Z. Standards for collaborative computational technologies for biomedical research. Ibid., pp. 201—208.
11. Clark, A. The lost art of editing. The Guardian, 11 February 2011.

Kilogram, pterin, selenium

I really enjoyed the latest issue of Chemistry International. Did you know that pterin is called “pterin” because it was first isolated from butterfly wings, and folic acid is “folic” because it was first found in leafy vegetables (from Latin folium)? I just learned that from Edward Taylor’s illuminating article on Alimta [1].

Next, two papers on kilogram in the “New SI”. Currently, kilogram is defined as a unit of mass equal to mass of the international prototype kilogram (IPK), which is a cylinder made of 90% platinum—10% iridium alloy kept at the International Bureau of Weights and Measures in France. The problem is, IPK is losing mass! But even if it did not, it is still not good that one of SI base units is linked to an artifact rather than to something more fundamental. The chemist in me prefers the definition of kilo based on carbon-12 mass [2] to the one based on Planck constant [3].

Finally, essay by Jan Trofast on discovery of selenium [4]. I didn’t know that Swedes discovered so many elements!

1. Taylor, E.C. (2011) From the wings of butterflies: The discovery and synthesis of Alimta. Chemistry International 33, 4—8.
2. Censullo, A.C., Hill, T.P. and Miller, J. (2011) Part I — From the current “kilogram problem” to a proposed definition. Chemistry International 33, 9—12.
3. Mills, I. (2011) Part II — Explicit-constant definitions for the kilogram and for the mole. Chemistry International 33, 12—15.
4. Trofast, J. (2011) Berzelius’ discovery of selenium. Chemistry International 33, 16—19.

Icosahedrite

In 1982, Dan Shechtman observed unusual diffraction pattern in aluminium—manganese alloy [1, 2]. Almost 30 years later, he was awarded The Nobel Prize in Chemistry 2011 “for the discovery of quasicrystals”.

Earlier this year, the first naturally occurring quasicrystal was described. Icosahedrite Al₆₃Cu₂₄Fe₁₃ is a new mineral found in southeastern Chukhotka, Russia. It is named “for the icosahedral symmetry of its internal atomic structure, as observed in its diffraction pattern” [3].

1. Shechtman, D., Blech, I., Gratias, D. and Cahn, J. (1984) Metallic phase with long-range orientational order and no translational symmetry. Physical Review Letters 53, 1951—1953.
2. Fernholm, A. (2011) Crystals of golden proportions. Nobelprize.org.
3. Bindi, L., Steinhardt, P.J., Yao, N. and Lu, P.J. (2011) Icosahedrite, Al₆₃Cu₂₄Fe₁₃, the first natural quasicrystal. American Mineralogist 96, 928—931.

Do we need the terminal e?

Chemical English, after all, is just a subset of English. As such, it suffers the same problem as English in general: the pronunciation of the words is far from obvious. What makes it worse for chemistry is absence of any authoritative pronunciation guide. (Since the last year’s post on this topic, the audio guide “Pronunciation of Chemical Terms”, originally hosted by Hong Kong Cyber Campus, has disappeared from the web.)

You’d think that the chemical terminology was developed after the Great Vowel Shift and therefore there must be less of gap between the spoken and written word. You’d be wrong. The gap is there, a-gaping.

For instance, the effect of silent terminal e on pronunciation of English words, including chemical terms, is simply unpredictable. Sometimes the terminal e makes no difference: both thiamine and thiamin are pronounced and mean the same. (Cf. “win” and “wine”.) In some other cases, it makes a lot of difference: chlorine (chemical element number 17) and chlorin (tetrapyrrole), or silicon (chemical element number 14) and silicone (a class of silicon-containing polymers).

Protein vs cysteine; cisplatin vs astatine; krypton vs ketone; phenol vs pyrrole — what is the point of terminal es? Wouldn’t we all be better off without them? That will spare us a few rules about elision of terminal vowels, for example.